Hot sales Inconel rod 601 625 718 inconel 600 round bar

Material	Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
Shape	Bar,Pipe/tube,sheet/plate,Forging,Ring,Coil,Flange,Ribbon,Square pipe/bar,
Grade	Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
	Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etc
	Inconel 600/601/602CA/617/625/713/718/738/X-750;ETC
	Incoloy: Incoloy 800/800H/800HT/825/925/926;etc
	GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etc
	Monel: Monel 400/K500/R405,etc
	Nitronic: Nitronic 40/50/60;etc
	Nimonic: Nimonic 75/80A/90/A263 ;etc
Specification	Wire: 0.01-10mm Strip: 0.055.0-5.0250mm Bar: φ4-50mm; Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm; Length 1000-8000mm Sheet: δ 0.8-36mm; Width 650-2000mm; Length 800-4500mm
Product Characteristics	1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..
Inspection	ISO,SGS,BV and so on.
Packaging	All our products are packed, stored, transported according to the international regulation.Or as customer's requirement provide special packing.

Inconel 625

Features:Inconel 625 has excellent strength at temperatures up to 816ºC. At higher temperatures, its strength is generally lower than that of other solid solution strengthened alloys. Inconel 625 has good oxidation resistance at temperatures up to 980ºC and shows good resistance to aqueous corrosion, but is relatively moderate compared to other more capable corrosion resistant alloys.

Applications:Chemical process industry and sea water application. Inconel 625 is used in short term applications at temperatures up to 816ºC. For long term service, it is best restricted to a maximum of 593ºC, because long term exposure above 593ºC will result in significant embrittlemen

Chemical Composition

Cr	Ni	Mo	Co	Nb	Al	Ti	C
20.00-30.00	Remainder	8.0-10.0	1.0 max	3.15-4.15	0.40 max	0.40 max	0.10 max

Fe	Mn	Si	P	S
5.0 max	0.50 max	0.50 max	0.015 max	0.015 max

Density and Melting point

Density	Melting point
8.44g/cm³	1290-1350°C

Mechanical Properties

Finish Condition	Tensile strength Rm N/mm²	Yield strength R P 0. 2N/mm²	Elongation (%) Min	HB
Solution treatment	760	345	30	≤220

Recommended Products

Message

Spanish

Hot sales Inconel rod 601 625 718 inconel 600 round bar

{{title}}